Nothing sews like a Bernina Sewing System! We carry a full line of Bernina sewing machines and accessories. We also offer a wonderful set of guide classes, free to those who buy their machines from us. Call us (208-743-4448) for more information on promotions, prices, and availability of the system that is just right for you! Or click on the Bernina banner below to be taken directly to Bernina's website where you will find all of Bernina's many products.

Trust your Bernina with only the best!

Certified Bernina Technicians

Diane - Located in Colfax Earlinia - Lewiston

Basic clean, oil, and adjust: Bernina 180/185/200/730 & Sergers - $89.95 All other Sewing Machines - $79.95 $25.00 minimum charge.

When You Bring Your Machine in for Servicing... Please Bring: Sewing Machine Embroidery Unit (If Applicable) BSR (Bernina Stitch Regulator–If Applicable) Power Cord Foot Control #1 Presser Foot #3A Presser Foot (Buttonhole) #9 or #15 Presser Foot (Embroidery Units Only) Bobbin Case Bobbin General Sewing Stitch Plate (Not Straight Stitch Plate) Do not bring any other accessories. If you are bringing in your sewing machine and embroidery unit to be updated, please save your designs on a personal design card, CD, or hard drive. Tips from the Tech! We do not recommend sewing over pins. You risk breaking a needle, which could fly in your face or cause a burr on the hook. If you have a broken needle, be sure to find and remove all broken pieces. Change your needle and oil the hook every 3-4 sewing hours. Do not use a dull or damaged needle. If your needle gets jammed in your fabric, disconnect the needle from the needle bar in order to remove the needle. Do not use the hand wheel to pry the needle out. It may cause your machine to go out of time or damage the hook of your machine. Please do not use canned air to clean out the hook area of your machine. Lint flies up and may damage the computer boards. Never use abrasives on the outer covers or touch screen. Any type of mild cleaning agent, such as 409, should be sprayed onto a cloth and then applied to clean covers. Never use acetone, mineral spirits or harsh chemicals. When you bring your machine in for service, please include your all-purpose foot, foot control and electrical cord. At check-in, please list any problems that you may be having with your machine. SURGE PROTECTORS ARE A MUST FOR ALL COMPUTER MACHINES! Recommended protection of at least 1000 joules.

| Home |